User-declaration of phase current feedback parameters using physical quantities. More...

Collaboration diagram for User Settings:

#define	BUCK_IOUT_MINIMUM (float) 0.000
	Declaration of phase-current feedback properties. More...

#define	BUCK_IOUT_MAXIMUM (float) 26.50
	absolute maximum output current (average) More...

#define	BUCK_IOUT_RELEASE (float) 24.00
	current reset level after over current event More...

#define	BUCK_ISNS_FEEDBACK_GAIN (float) 0.050
	Phase Current Gain in V/A. More...

#define	BUCK_ISNS_MINIMUM (float) 0.000
	absolute minimum phase current (average) More...

#define	BUCK_ISNS_MAXIMUM (float) 26.50
	absolute maximum phase current (average) More...

#define	BUCK_ISNS_RELEASE (float) 24.00
	current reset level after over current event More...

#define	BUCK_ISNS_REFERENCE (float) 18.00
	output current reference (average) More...

#define	BUCK_ISNS_ADC_TRG_DELAY (float) 120.0e-9
	ADC trigger delay for current sense in [sec]. More...

#define	BUCK_ISNS1_FEEDBACK_OFFSET (float) 1.650
	current sense #1 feedback offset (average) More...

#define	BUCK_ISNS2_FEEDBACK_OFFSET (float) 1.650
	current sense #2 feedback offset (average) More...

Detailed Description

User-declaration of phase current feedback parameters using physical quantities.

Macro Definition Documentation

◆ BUCK_IOUT_MAXIMUM

#define BUCK_IOUT_MAXIMUM (float) 26.50

absolute maximum output current (average)

Definition at line 561 of file epc9143_r40_hwdescr.h.

◆ BUCK_IOUT_MINIMUM

#define BUCK_IOUT_MINIMUM (float) 0.000

Declaration of phase-current feedback properties.

Description: In this section the phase-current feedback signal scaling, gain, valid signal limits and nominal operating point is specified. Physical quantities are used to define parameter values to ease the system configuration.

Macros are used to convert given physical values into binary (integer) number to be written into SFRs and variables and being used in runtime calculations.
(see Conversion Macros for details) absolute minimum output current (average)

Definition at line 560 of file epc9143_r40_hwdescr.h.

◆ BUCK_IOUT_RELEASE

#define BUCK_IOUT_RELEASE (float) 24.00

current reset level after over current event

Definition at line 562 of file epc9143_r40_hwdescr.h.

◆ BUCK_ISNS1_FEEDBACK_OFFSET

#define BUCK_ISNS1_FEEDBACK_OFFSET (float) 1.650

current sense #1 feedback offset (average)

Definition at line 571 of file epc9143_r40_hwdescr.h.

◆ BUCK_ISNS2_FEEDBACK_OFFSET

#define BUCK_ISNS2_FEEDBACK_OFFSET (float) 1.650

current sense #2 feedback offset (average)

Definition at line 572 of file epc9143_r40_hwdescr.h.

◆ BUCK_ISNS_ADC_TRG_DELAY

#define BUCK_ISNS_ADC_TRG_DELAY (float) 120.0e-9

ADC trigger delay for current sense in [sec].

Definition at line 569 of file epc9143_r40_hwdescr.h.

◆ BUCK_ISNS_FEEDBACK_GAIN

#define BUCK_ISNS_FEEDBACK_GAIN (float) 0.050

Phase Current Gain in V/A.

Definition at line 564 of file epc9143_r40_hwdescr.h.

◆ BUCK_ISNS_MAXIMUM

#define BUCK_ISNS_MAXIMUM (float) 26.50

absolute maximum phase current (average)

Definition at line 566 of file epc9143_r40_hwdescr.h.

◆ BUCK_ISNS_MINIMUM

#define BUCK_ISNS_MINIMUM (float) 0.000

absolute minimum phase current (average)

Definition at line 565 of file epc9143_r40_hwdescr.h.

◆ BUCK_ISNS_REFERENCE

#define BUCK_ISNS_REFERENCE (float) 18.00

output current reference (average)

Definition at line 568 of file epc9143_r40_hwdescr.h.

◆ BUCK_ISNS_RELEASE

#define BUCK_ISNS_RELEASE (float) 24.00

current reset level after over current event

Definition at line 567 of file epc9143_r40_hwdescr.h.